Shimano SC-EN600 Dealer's Manual page 5

TO ENSURE SAFETY
Be sure to also inform users of the following:
Be sure to attach dummy plugs to any unused E-TUBE ports.
For installation and adjustment of the product, consult the place of purchase.
The components are designed to be fully waterproofed to withstand wet weather riding conditions. However,
do not deliberately place them into water.
Do not clean the bicycle in a high-pressure wash. If water gets into any of the components, operating
problems or rusting may result.
Handle the components carefully, and avoid subjecting them to strong shock.
Do not turn the bicycle upside down. There is a risk of damage to the cycle computer and switch unit.
Although the bicycle still functions as a normal bicycle even when the battery is removed, the light will not
turn on if it is connected to the electric power system. Be aware that using the bicycle under these conditions
will be considered non-observance of the road traffic laws in Germany.
Some of the important information in this dealer's manual can also be found on the device labels.
For any questions regarding methods of installation and maintenance, please contact your place of purchase.
Contact the place of purchase for updates of the component software. The most up-to-date information is
available on the SHIMANO website. For details, refer to the "
Products are not guaranteed against natural wear and deterioration from normal use and aging.
For maximum performance we highly recommend SHIMANO lubricants and maintenance products.
Connection and communication with PC
Using a PC linkage device to connect a PC to your bicycle (system or component) allows you to use E-TUBE
PROJECT Professional to perform a range of tasks, such as customizing individual components or the entire
system, or updating firmware.
PC linkage device: SM-PCE02
E-TUBE PROJECT Professional: PC application
Firmware: Software inside each component
Connection and communication with smartphones (supported models only)
Connecting your bicycle (system or component) over Bluetooth
PROJECT Cyclist to perform a range of tasks, such as customizing individual components or the system, or
updating firmware.
E-TUBE PROJECT Cyclist: Application for smartphones
Firmware: Software inside each component
Introduction " section.
®
LE to a smartphone allows you to use E-TUBE
5