Wireless Connection; Ghz Digital Wireless Systems; Ant Connection; Connection Method - Shimano Steps SC-E6100 User Manual

Wireless connection

This product has a wireless communication function.
„ 2.4 GHz digital wireless systems
2.4 GHz frequency digital wireless technology is the same thing as a wireless LAN. In rare instances, strong electromagnetic
waves or electromagnetic interference due to the following locations or devices may impact communication.
• TVs, PCs, radios, motors/engines, or inside vehicles or trains
• Near railroad crossings and tracks, television transmitter stations, and radar stations
• Other wireless computers or digital control lights
„ ANT connection
All the information displayed on the main screen can be sent to an external device that supports ANT connections.

Connection method

When the main power is turned ON for SHIMANO STEPS, communication can be received at any time. Refer to the
manual of the external device, switch the external device to connection mode, and then connect it.
„ Bluetooth LE connection
®
All the information displayed on the main screen can be sent to an external device that supports Bluetooth
The smartphone version of E-TUBE PROJECT may be used if a Bluetooth
E-TUBE RIDE can be used to check traveling data on a smartphone connected over Bluetooth
Connection method
Communication can only be received under the following conditions. Refer to the manual of the external device, switch
the external device to connection mode, and then connect it.
• Within 30 seconds of the main power for SHIMANO STEPS turning ON
• Within 30 seconds of operating any button/switch other than the SHIMANO STEPS power switch
„ Wireless system specifications
Model name
Frequency band
Maximum high-frequency output
Firmware version
„ E-TUBE PROJECT
E-TUBE PROJECT is needed to change the setting of the SHIMANO STEPS and to update firmware.
Download E-TUBE PROJECT from our support website (https://bike.shimano.com/e-tube/project.html).
For information on how to install E-TUBE PROJECT, check the support website.
Do not connect to a device while the battery is being charged.
• Firmware is subject to change without notice.
LE connection is established with a smartphone.
®
SC-E6100
2,402 - 2,480 MHz
+4 dBm
4.0.0 or later
NOTICE
23
LE connections.
®
LE.
®