Time Settings - Shimano SC-EN600 Dealer's Manual

Maintenance

Time settings

Adjusting when the setting value is not [0]
If the setting value is not [0], set the setting value to [0] prior to adjusting.
1. <▲><▼> (return the setting value to [0]) ⇒ <↑><↓> (select [OK]) ⇒ <F>
* Switch unit integrated type: <
Clamp band type
cycle computer example
(SC-EN600)
2. Try gear shifting operations.
Press < >< > while turning the crank to perform gear shifting, and confirm that the adjustment has
▲ ▼
changed. Refer to step
3. Finally, ride the bicycle and try shifting gears to check that the abnormal noise or unusual feel has been
resolved.
Time settings
The time is automatically corrected to the current time when you connect to E-TUBE PROJECT Professional. Some
cycle computers may not have a function for displaying the time, but their system still has an internal time which
is used for determining when to notify the user of maintenance alerts, for unit logs, etc.
>< > (return the setting value to [0]) ⇒ <A>
▲ ▼
Switch unit integrated type
cycle computer example
(SC-EN500)
4 in "Adjusting when the setting value is [0]" and adjust according to the symptom.
56