Alpha ESS SMILE-B3-PLUS Installation Manual page 24

Your Smart Energy
1. Drill 8 holes on the wall with drill Φ10 and insert 8 screw anchors into the drill holes.
2. Attach the wall bracket to the wall using the screws with the tool of SW10 hexagon
sleeve.
3. Hold the handles on both sides of the inverter and install SMILE-B3-PLUS on the
wall bracket. This step should take two people to complete.
4. Tighten the wall bracket and SMILE-B3-PLUS with screw M6*16 (X6) (tool: T20
screwdriver, torque: 3.0 Nm).
5. Perform electrical connection work (please refer to Section 7 Electrical Connection).
NOTE:
If there are no expansion batteries to install, please ignore Chapter 6.3.2 and skip to
6.3.3.
___________________________________________________________________
Page 24 of 69
Alpha ESS Co., Ltd.