Alpha ESS SMILE-B3-PLUS Installation Manual page 11

Energy storage system
Hide thumbs Also See for SMILE-B3-PLUS:
Table of Contents

Advertisement

zz
WARNING
Risk of chemical burns from electrolyte or toxic gases
During normal operation, no electrolyte can leak from the battery pack and no
toxic gases can form. Despite careful construction, if the battery pack is damaged
or a fault occurs, it is possible that electrolyte may be leaked or toxic gases
formed.
• Store the battery pack in a cool and dry place.
• Do not drop the battery pack or damage it with sharp objects.
• Only set the battery pack down on its back or its bottom.
• Do not open the battery pack.
• Do not install or operate the battery pack in potentially explosive atmosphere
or areas of high humidity.
• If moisture has penetrated the battery pack (e.g. due to a damaged housing),
do not install or operate the battery pack.
• In case of contact with electrolyte, rinse the affected areas immediately with
water and consult a doctor without delay.
CAUTION
Risk of burns due to hot heatsink and housing
The heatsink and housing can get hot during operation.
• During operation, do not touch any parts other than the cover of the inverter.
NOTICE
Damage to the inverter due to electrostatic discharge
• Touching electronic components can cause damage to or destroy the inverter
through electrostatic discharge.
• Ground yourself before touching any component.
NOTICE
Damage due to cleaning agents
The use of cleaning agents may cause damage to the product and its components.
• Clean the product and all its components only with a cloth moistened with
clear water.
___________________________________________________________________
Alpha ESS Co., Ltd.
Your Smart Energy
Page 11 of 69

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Smile-b3-plus iiSmile-b3-plus iiiSmile-b3-plus ivSmile-b3-plus vSmile-b3-plus vi

Table of Contents