2.2 Installation
VF Bullet Camera
2.2.1
1. Paste the drill template (supplied) to
the place where you want to install
the camera shown as Pic 3
Adjust the camera angle and tighten
4.
the body of camera
Connect the corresponding power
5.
cord and video cable.
Adjust sun-shield position shown as
7.
Pic. 5
Pic. 5
Pic. 3
Drill the screw holes and the cable
2.
hole (optional) in the ceiling/wall
according to the drill tem plate.
Mount the bullet camera and f ix the
3.
base of the camera to the ceiling or
wall shown as Pic 4
Power-on the camera to check
6.
whether the image on the monitor is
available from the optimum angle. If
not, use "L" wrench to adjust the
camera to the optimum angle.
Allow you mount on the ceiling/wall
8.
Shown as Pic 6
7
Pic. 4
Pic.6