Page 1
User Manual 1/2.9” HD Dome, Fixed, Day&Night, 1920x1080, 2.8-12mm, Infrared, 12VDC, IP66 MEP-62M2812M0A...
Page 2
WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. DO NOT INSERT ANY METALLIC OBJECTS THROUGH THE VENTILATION GRILLS OTHER OPENINGS EQUIPMENT. CAUTION CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE.
Page 3
FCC COMPLIANCE STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC INFORMATION: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.
Page 4
IMPORTANT SAFETY INSTRUCTIONS Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
2 Installation and Configuration 2.1 Package Contents The package contains the following. • Camera • Instruction Manual (This Document) • Template Sheet • Accessory Kit 2.2 Installing the Camera The camera is for use in surface or pendent mounting applications, and the mounting member must be capable of supporting loads of up to 4.5 kg.
2.3 Setting the Camera NOTE: Open the cover and change the video output setting. The cover should be closed after video output setting. You can set video signal with S1. Position Left Center Right Video Signal AHD Output HD-TVI Output CVBS Output NOTE: Please note that setup and PTZ control of the camera is only possible via Pelco C (UTC / HD_TVI) protocol.
2.4 Connections Connector Description DC jack 12VDC BNC jack VIDEO OUTPUT The camera must be installed by qualified service personnel in accordance with all local and federal electrical and building codes. • Connecting Video Output connector Connect the video output (BNC) connector to the video input. •...
2.5 OSD Menu Structure NOTE: Please note that setup and PTZ control of the camera is only possible via Pelco C (UTC / / HD_TVI) protocol. MAIN MENU LENS LENS EXPOSURE BACKLIGHT EXPOSURE BACKLIGHT SHUTTER DC WHITE BAL MANUAL DAY&NIGHT SENS-UP HSBLC IMAGE...
3 OSD Menu 3.1 Lens MAIN MENU OUTDOOR MODE DC LENS MODE LENS MIN SHU. 1/25(30) DC EXPOSURE MODE MAX SHU. 1/2000 OUTDOOR 8 BACKLIGHT IRIS SPEED RETURN RET WHITE BAL RETURN RET DAY&NIGHT AUTO IMAGE FUNCTION ...
3.3 Backlight MAIN MENU HLBLC LENS DC EXPOSURE LEVEL MIDDLE SELECT AREA1 BACKLIGHT AREA DISPLAY ON WHITE BAL DEFAULT BLACK MASK 20 DAY&NIGHT RETURN LEVEL AUTO RET IMAGE MODE NIGHT FUNCTION DEFAULT SYSTEM RETURN RET...
3.8 System MAIN MENU CAMERA TITLE SYSTEM LENS 0 1 2 3 4 5 6 7 8 9 DC EXPOSURE CAM TITLE A B C D E F G H I J K BACKLIGHT MONITOR LCD L M N O P Q R S T U V W X Y Z ...
3.9 AF MAIN MENU LENS DC EXPOSURE AF MODE SEMI BACKLIGHT ONE SHOT AF WHITE BAL TDN AF DAY&NIGHT AUTO LENS INIT IMAGE RETURN RET FUNCTION SYSTEM AF EXIT SAVE&END AF MODE: SEMI, AUTO, MANUAL ONE SHOT AF: Will focus the camera.