Eneo MEB-55M2812M0A User Manual page 10

3.
Fix the base of the camera with the three
screws provided in the accessory kit shown
as Pic 13.
Mounting Screw
2.2.4 VF Vandal-proof Camera
1. Paste the Installation template sheet in place
where mounted the camera shown as Pic 15.
Pic 15.
3. Open the dome cover by loosening screws and
connect the power and BNC cable with the camera
cables
Pic. 13
4.
Mount the enclosure and trim ring back by
rotating it up shown as Pic 14
2. Drill the hole and screw the expansion bolt into
the hole shown as Pic 16.
4. Mount the vandal proof dome base to the mounting
plate cables, then Set the camera's viewing angle. Lastly
Put the dome cover to the dome unit and tighten
screws.
Pic. 14
Pic 16.