Eneo MEB-55M2812M0A User Manual page 13

EXPOSURE: describes the brightness-related parameters which can be adjusted by
Brightness, Exposure Mode etc.
 Brightness: Adjust its brightness level. The brightness can be set from 1 to 100.
 Backlight: compensates light to the object in the front to make it clear, but this may cause
the over exposure of the background where the light is strong. You can choose its level
from 0 to 7.
D-WDR (Digital Wide Dynamic Range): will balance the brightness level of the whole image to
provide clear images with details. You can set as OFF and ON
WHITE BALANCE: White balance, the white rendition function of the camera, is to adjust the
color temperature according to the environment. It can remove unrealistic color cast in the
images. You can set WHITE BALANCE mode as Auto or Manual.
 Auto: Under the Auto mode, white balance can be adjusted automatically according to the
color temperature of the scene illumination.
 Manual: Under the Manual mode, you can set the R-GAIN/B-GAIN value from 1 to 255 to
adjust the shades of red/blue color of the image.
DAY & NIGHT: COLOR, B/W and EXT, are selectable for DAY/NIGHT switch.
 COLOR: The image is colored in day mode all the time
 B/W: The image is black and white all the time, and the IR led turns on in the poor light
conditions. Under the B/W mode, you can turn on/off the IR led to meet the requirement
of different circumstances and set the value of IR Smart in this menu.
IR Smart: The function is used to adjust the light to its most suitable intensity and avoid
the image from over-exposure.
Level: The IR level value is set from 0 to 15. The higher the value is, the more obvious
effects are.
Area: Set its area parameters as <Position>, <Size> <RET> and <Again> etc.
 EXT: The option allow you set its switch delay time when the mode is switched from
DN or ND
DN (Day to Night) : is used to control the delay time of switching the <Day> to the
<Night> mode. You can set the value from 0 to 60. The smaller the value is, more
quickly the camera switch between the two modes.
ND (Night to Day) : is used to control the delay time of switching the <Night> to the
<Day> mode. You can set the value from 0 to 60. The smaller the value is, more quickly
the camera switch between the two modes.
Image Enhance: The menu is used to mainly adjust video parameter setting. Its sub-menus
have Contrast, Sharpness, Saturate, 3DNR, and 2DNR, Flip and Mirror. Details please refer
to the above Menu structure.
 Contrast, Sharpness, Saturate: allow you adjust contrast, sharpness and saturate of the
images. It can be set to <Auto> or <Manual>. And under the <Manual> mode, its level
value is 0 ~20.
 NR (Noise Reduction): The 2 DNR and 3 DNR can decrease the noise effect, especially
12