Thermo Scientific NICOLET iS10 Getting Started page 13

Thermo Fisher Scientific
Next, make sure the sampling accessory is properly installed in the
sample compartment:
If you have...
An ATR accessory
The Smart OMNI-Transmission
Accessory
A DRIFTS accessory
A specular reflection accessory
You should...
Make sure the pressure device, if
included, is not in contact with
the crystal. Clean the crystal with
a soft cloth and, if needed, an
appropriate solvent.
Make sure no samples that would
block the beam are installed in
the accessory.
Make sure the slider is pushed in
to the second cup (the one closer
to the handle). This positions the
gold disk in the beam.
Place a gold mirror face down on
the accessory.
Getting Started with an iS10 Spectrometer 9