Thermo Scientific NICOLET iS10 Getting Started page 10

Hide thumbs Also See for NICOLET iS10:

Table of Contents

Getting Started with an iS10 Spectrometer

➅

Your spectrometer is protected from environmental humidity and

other chemical vapors by two windows. These windows isolate the

optics in the spectrometer and are coated to improve their resistance

to water vapor. You still, however, need to be careful when cleaning

your spectrometer to avoid damaging the optics or the windows.

For more information, please refer to the "Cleaning your

spectrometer" topic in the spectrometer help (available through the

Help menu in OMNIC).

➆

The auxiliary signals port is used for accessories with detectors or

power needs, such as the Micro Well Plate accessory and the near-

IR integrating sphere.

➇

You can replace the source in your instrument without removing

the cover. Two sources are available: one for the mid-IR range

(EverGlo™) and another for the near-IR range (tungsten-halogen).

(For information about installing a new source, open the

spectrometer help from the Help menu in OMNIC. Choose the

"Source" topic from the "Replacing existing hardware" book in the

"Service" book of the spectrometer help system.)

Thermo Fisher Scientific

Table of Contents