Figure 6-27: Control Password Modification Interface; Figure 6-28: Control Password Modification Interface - Eaton 93PR Series Installation And Operation Manual

The control password modification interface is used to modify the password for entering the
control interface. When the "Enable Control Password" button on this interface is clicked, the
Figure
keyboard and password boxes for modifying the control password will appear, as shown in
6-28
. Then the control password can be modified.
Click the keyboard on the right side of the interface to enter the current password and the new
password, then click the "OK" button on the keyboard. If the password is verified, "New password
Figure 6-29
has been saved" will be prompted on the interface, as shown in . If a wrong password
is entered, "Wrong password" will be prompted on the interface, which means that you need to
re-enter a password, as shown in Figure 6-30 .

Figure 6-27: Control password modification interface

Figure 6-28: Control password modification interface

61
Copyright © 2022 Eaton Corporation plc. All rights reserved.