Taiwan Commate Computer Inc. PV-DDR User Manual page 47

to load LAN driver for Windows ME.
4.4.4 Windows 2000 Installation
1. Open " My Computer " and select " Control Panel " icon.
2. Select " System " icon, and then select " Hardware " page then click "
Device Manager " button.
3. Select " ?!Ethernet Controller " from ?Other devices. Then press right
button on your mouse.
4. Select " Properties ".
5. Select " Driver " page.
6. Click " Update Driver... " button.
7. Click " Next " button.
8. Select " Search for a suitable driver for my device [recommended] " then
click " Next " button.
9. Select " Specify a location " then click " Next " button.
10. Type in the correct drive and path then click " OK " button. For example
D:\VIA\ACR-LAN\W2000
11. Click " Next " button to install the driver.
12. System detects PCI 10/100Mb Fast Ethernet Adapter. Click " Yes " button
to continue the installation.
13. Click " Finish " button to complete the installation.
4.4.5 Windows NT 4.0 Installation
(1). If you setup ACR LAN card when Windows NT is installing:
1. Please copy LAN driver for NT to your HDD before installing Windows NT.
For example: copy D:\VIA\ACR-LAN\WNT40\*.* C:\NTDRV or
copy D:\VIA\ACR-LAN\WNT40\*.* A:\NTDRV or