4.4
ACR LAN Driver Installation
4.4.1 Windows 95 Installation
1. Executing Windows 95 Setup. When " Analying your computer " dialog box
is appeared, please click the check box to " Network Adapter". Then click "
Next " to continue.
2. When Windows 95 is installed. Please upgrade your Windows 95 to OSR2.1
if your Windows 95 is older version. Please load usbsupp.exe first. You can
get the file from Microsoft Inc.
3. When Windows 95 is installed, please open " My Computer ", and select "
Control Panel " icon.
4. Select " System " icon, and then select " Device Manager " page.
5. Double click " ?Other devices ".
6. Double click " ?PCI Ethernet Controller ".
7. Select " Driver " page.
8. Click " Update Driver " button.
9. Select " Yes [Recommended] " then click " Next " button.
10. Click " Other Location " button.
11. Type in the correct drive and path then click " OK " button. For example
D:\VIA\ACR-LAN\W95OSR2
(D: is the drive where CD Driver disk has been inserted)
12. Click " Finish " button.
13. You must provide computer and workgroup names then click on " Close "
button.
14. When Insert Disk dialog is displayed, Please insert the " Windows 95 CD
ROM " and click " OK " button.
15. When system wants to copy FETND4.INF and FETND4.SYS files, insert
CD Driver Disk to CD ROM then type in " D:\VIA\ACR-LAN\W95OSR2
". Click " OK " button.
Need help?
Do you have a question about the PV-DDR and is the answer not in the manual?