Taiwan Commate Computer Inc. PV-DDR User Manual page 35

This item tells the Power Management BIOS which IRQ is assigned to
the installed MODEM. Options are NA, 3, 4, 5, 7, 9, 10 and 11.
3.6.8 Soft-off by PWRBTN
When set to "Delay 4 Sec", the power button has a dual function where
pressing less than 4 seconds will place the system in sleep mode and shut
down the system when the button is held more than 4 seconds. "Instant-
Off", the system will be shut down right away when the power button is
pressed.
3.6.9 State After Power Failure
Off: When power returns after an AC power failure, the system's power is
off. You must press the Power button to power-on the system.
On: When power returns after an AC power failure, the system will
automatically power-on.
Auto: When power returns after an AC power failure, the system will
return to the state where you left off before power failure occurs.
If the system's power is off when AC power failure occurs, it will
remain off when power returns. If the system's power is on when
AC power failure occurs, the system will power-on when power
returns.
3.6.10 IRQ/Event Activity Detect
CMOS Setup Utility - Copyright ( C ) 1984 - 2001 Award Software
PS2KB Wakeup
VGA
LPT & COM
HDD & FDD
PCI Master
PowerOn by PCI Card
Wake Up On LAN/Ring
RTC Alarm Resume
X Date (of Month)
X Resume Time (hh:mm:ss)
> IRQs Activity Monitoring
Exit F1 : General Help
IRQ/Event Activity Detect
[Any Key]
[OFF]
[LPT / COM]
[ON]
[OFF]
[Disabled]
[Disabled]
[Disabled]
0
0 0 0
[Press Enter]
¯ ® ¬: Move
Enter : Select
Item Help
Menu Level >
+/-/PU/PD : Value F10 : Save ESC :