Way. The default value is Disabled.
3.4.8 DRAM Command Rate
DRAM Command Rate will be shown on the item.
CMOS Setup Utility - Copyright ( C ) 1984 - 2001 Award Software
AGP Aperture Size
AGP Mode
AGP Driving Control
X AGP Driving Value
AGP Fast Write
AGP Master 1 WS Write
AGP Master 1 WS Read
Exit F1 : General Help
Optimized Defaults
3.4.9 AGP Aperture Size
Choose 4, 8, 16, 32, 64, 128, 256MB. Memory-mapped, graphics data
structures can reside in the Graphics Aperture.
3.4.10 AGP Mode
The item sets an appropriate mode for the installed AGP card. Settings
are 1X, 2X or 4X. The 4X item can be found when AGP 4X VGA card is
installed.
3.4.11 AGP Driving Control
This item is use for control AGP drive strength.
Auto: Setup AGP drive strength by default setting.
Manual: Setup AGP drive strength by manual setting.
3.4.12 AGP Driving Value
AGP & P2P Bridge Control
[64M]
[2X]
[Auto]
DA
[Disabled]
[Disabled]
[Disabled]
¯ ® ¬: Move
Enter : Select
F5 : Previous Value
Item Help
Menu Level >
+/-/PU/PD : Value F10 : Save ESC :
F6 : Fail-Safe Defaults
F7 :
Need help?
Do you have a question about the PV-DDR and is the answer not in the manual?