Taiwan Commate Computer Inc. PV-DDR User Manual page 23

Select "Enabled" to configure "Typematic Rate" and "Typematic Delay"
functions.
3.3.13 Typematic Rate
Use this option to set the rate at which a character keeps repeating while
you hold down a key.
3.3.14 Typematic Delay
Select "Enabled" to set the length of delay before key strokes to repeat.
Available options are 250, 500, 750, and 1000.
3.3.15 Security Option
You can select whether the password is required every time the system
boots or only when you enter the Setup. You can assign "Supervisor
Password" and "User Password" in the main CMOS Setup Utility Screen.
3.3.16 OS Select for DRAM > 64MB
If you are using OS/2 operating system and installed memory is larger
than 64MB. You need to have the setting in the enable mode.
3.3.17 Report No FDD For WIN 95
While the FDD in " STANDARD CMOS SETUP " is set to NONE, set
this option to No to release IRQ6 for passing Win95 logo. This option is
irrelevant under normal operation.
3.3.18 Video BIOS Shadow
Video shadow copies BIOS code from slower ROM to faster RAM.
BIOS can then execute from RAM.
3.3.19 Small Logo(EPA) Show
This field allow user to Enabled or Disabled EPA logo when system is
booting.
3.4 Advanced Chipset Features Setup