Download Print this page

Taiwan Commate Computer Inc. PV-DDR User Manual page 38

Advertisement

Optimized Defaults
3.6.21 Primary INTR
When set to On (default), any interrupt request is set to Enabled (see
below) will awaken the system which has been powered down.
Following this option is a list of IRQs (Interrupt ReQuests). You can set
each IRQ to be Enabled or Disabled.
3.7 PNP/PCI Configuration Setup
Figure 3.7 PNP/PCI CONFIGURATION SETUP
CMOS Setup Utility - Copyright ( C ) 1984 - 2000 Award Software
PNP OS Installed
Reset Configuration Data
Resources Controlled By
X IRQ Resources
PCI/VGA Palette Snoop
Assign IRQ For VGA
Assign IRQ For USB
Exit F1 : General Help
Optimized Defaults
3.7.1 PNP OS Installed
This field allows you to use a Plug-and-Play (PnP) operating system.
Please set it as " No " if the operating system has no PnP function or to
avoid reassigning the IRQs by the operating system.
F5 : Previous Value
PnP/PCI Configurations
[No]
[Disabled]
[Auto (ESCD)]
Press Enter
[Disabled]
[Enabled]
[Enabled]
¯ ® ¬: Move
Enter : Select
F5 : Previous Value
F6 : Fail-Safe Defaults
Item
Help
Menu
Level >
+/-/PU/PD : Value F10 : Save ESC :
F6 : Fail-Safe Defaults
F7 :
F7 :

Advertisement

loading
Need help?

Need help?

Do you have a question about the PV-DDR and is the answer not in the manual?

Subscribe to Our Youtube Channel