3.5.16 Init Display First
Select "AGP" or "PCI Slot" for system to detect first when boot-up.
3.5.17 OnChip USB Controller
You can select USB port 1 (on back panel), port 2 (JUSB1) or port 3
(JUSB2) Enabled or Disabled for your USB peripheral.
3.5.18 USB Keyboard Support
This item lets you enable or disable the USB keyboard driver within the
onboard BIOS.
3.5.19 IDE HDD Block Mode
This feature enhances disk performance by allowing multi-sector data
transfers and eliminates the interrupt handling time for each sector.
3.6 Power Management Setup
Power management decreases power usage under the pre-defined standby time
range.
CMOS Setup Utility - Copyright ( C ) 1984 - 2001 Award Software
ACPI function
Power Management Option
HDD Power Down
Suspend Mode
Video Off Option
Video Off Method
MODEM Use IRQ
Soft-off by PWRBTN
State After Power Failure
> IRQ/Event Activity Detect
Exit F1 : General Help
Optimized Defaults
Figure 3-6. Power Management Setup Screen
Power Management Setup
[Enabled]
[User Define]
[[isabled]
[Disabled]
[Suspendà off]
[V/H SYNC+Blank]
[3]
[Instant-off]
[Auto]
[Press Enter]
¯ ® ¬: Move
Enter : Select
F5 : Previous Value
Item Help
Menu Level >
+/-/PU/PD : Value F10 : Save ESC :
F6 : Fail-Safe Defaults
F7 :
Need help?
Do you have a question about the PV-DDR and is the answer not in the manual?