Taiwan Commate Computer Inc. PV-DDR User Manual page 37

S5.
3.6.17 Wake Up On LAN/Ring
(1) With a LAN card installed, the function allows you to remotely power
up your system through your network by sending a wake-up frame or
signal. With this feature, you can remotely upload / download data
to/from systems during off-peak hours. Please refer to session 2.4.4 for
more information.
(2) With a Modem installed, the function allows you to power up the
computer when Modem receives a call while the computer is in Soft-off
mode. Please refer to session 2.4.5 for more information.
3.6.18 RTC Alarm Resume
Set this option to enable or disable the RTC Alarm to Wake Up the
system which is set at soft Off.
3.6.19 Date (of Month), Resume Time (hh:mm:ss)
Set these options to specify the RTC Alarm time on Date / Hour / Minute
/
Second.
3.6.20 IRQs Activity Monitoring
CMOS Setup Utility - Copyright ( C ) 1984 - 2001 Award Software
Primary INTR
IRQ3 (COM2)
IRQ4 (COM1)
IRQ5 (LPT2)
IRQ6 (Floppy Disk)
IRQ7 (LPT1)
IRQ8 (RTC Alarm)
IRQ9 (IRQ2 Redir)
IRQ10 (Reserved)
IRQ11 (Reserved)
IRQ12 (PS/2 Mouse)
IRQ13 (Coprocessor)
IRQ14 (Hard Disk)
IRQ15 (Reserved)
Exit F1 : General Help
IRQs Activity Monitoring
[ON]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
[Enabled]
[Enabled]
[Enabled]
[Disabled]
¯ ® ¬: Move
Enter : Select
Item Help
Menu Level >
+/-/PU/PD : Value F10 : Save ESC :