Optimum THERMOCOOK ESSENTIAL User Manual page 27

SCALES
This Thermo Cooker has inbuilt weighing scales and can weight from 1 to 4,999 grams in 1-gram
increments.
NOTE: The Scale Function will only function when the jar lid is not fitted to the jar and locked in
place.
The Scale Touch Button Icon will not be displayed if the jar lid is fitted and locked.
If the Jar lid is fitted to the Jar, remove the lid.
The appliance must be paused or in standby mode to use the scale function.
Touch the Scale Touch Button to enter the Scale function. Press the Control Knob to quit
The Timer digits will disappear and the Scale digits will show approximately 5 seconds later and blink
"0 00 0" by default, indicating the scale function has been activated.
The ingredients will be weighed as they are added in the jar, and the display shows the value in
grams. The scales can be reset between adding ingredients by pressing the scales button to reset
to 0 00 0.
Note: If there are ingredients already inside the jar and new ones are added, the scale will add both
values and the display will show the total weight in the jar.
Note: Adding ingredients after exiting the scale function and re-entering will not display the
combined weight. It will only show the weight of the newly added ingredients and only whilst in the
Scale Mode.
Therefore: the display might show negative values when food is removed from the inside of
the jar.
Note: as soon as the jar lid is fitted and locked onto the jar, and the jar is fitted to the appliance, the
scale function will disappear and the timer digits will re-appear.
PRE-SET PROGRAMS
There are a total of 18 pre-set programs in the Thermo Cooker memory to make operation easier.
Touch the Pre-set Program Touch Button to enter the Pre-set program menu then rotate
the knob to the desired program number from P01 - P18 as follows:
25