Optimum THERMOCOOK ESSENTIAL User Manual page 26

HEATING POWER
This part of the Digital Display shows the Heating Power from level 0 to 10.
(10 is the highest setting which means it will heat quicker).
To set the desired Heating Power, touch the Heat Function Touch Button at the bottom
of display to enter the Heating Power Setting, and the Heating Power Digits will blink.
NOTE: You will have approximately 5 seconds to set the Heating Power required before the
display returns to normal.
NOTE: Some of the Pre-set programs lock the Heating Power so you cannot adjust during
operation.
Within 5 seconds, rotate the knob to adjust the Heating Power required.
Note: as you adjust the Heating Power, the Temperature Digit will automatically show 100°C
by default.
You need to select a setting from 1 to 10 for this function to work. If you leave the setting as 0, it will
not work.
TURBO MODE
To set Turbo function, touch Turbo Function Touch Button to start Turbo Mode.
This function starts the appliance at the highest speed.
Stop touching the Turbo Function Touch Button, and the appliance will stop immediately.
NOTE: This function will only operate for a maximum of 1 minute each time.
WARNING: Ensure you have the correct ingredients and accessory fitted suitable for full speed use
before using this function; otherwise, you will damage the product.
24