Optimum THERMOCOOK ESSENTIAL User Manual page 14

KNEADING BLADE
The Kneading Blade is used primarily for kneading dough.
IMPORTANT: Do not use the Kneading Blade above speed setting 3.
To install the Kneading Blade, follow the steps below:
1. Place the jar onto the main body in the correct orientation and secure it properly.
2. Grasp the top of the blade post.
3. Lower the Kneading Blade over the top of the Drive Coupling in the bottom of the jar, ensuring to
align the tabs on the drive coupling with the slots in the bottom of the blade, then push down firmly
and rotate anticlockwise until it locks securely in place.
4. Pull to ensure blade locked safely.
IMPORTANT: The jar must sit on the main body properly, or you will fail to install blade.
12