Optimum THERMOCOOK ESSENTIAL User Manual page 25

SPEED
This part of the Digital Display shows the Speed.
To set the desired speed, touch the Speed Touch Button at the bottom of display to enter the
Speed Setting, and the Speed Digit will blink.
NOTE: You will have approximately 5 seconds to set the speed required before the display returns to
normal.
NOTE: Some of the Pre-set programs lock the speed so you cannot adjust during operation.
Within 5 seconds, rotate the knob to adjust the Speed required.
Speed ranges from level: 1 - 10. (10 is the Highest Speed)
NOTE: If in blending & heating mode, and if the temperature setting, or the actual temperature is
over 90°C, the maximum speed settings that can be selected are speeds 1 to 4.
If the appliance is working, or set at higher speed (5 to 10), and the temperature reaches or is set to
91°C or above, the speed will automatically drop to speed setting 4.
Important: If using the appliance at speed settings 8, 9 or 10, do not run for more than 2 minutes at a
time without a 5-minute cool down period in-between uses.
TEMPERATURE
This part of the Digital Display shows the Temperature in Degrees Celsius (°C).
To set the desired temperature, touch the Temperature Setup Touch Button at the bottom of
display to enter the Temperature Setting, and the Temperature Digits will blink.
NOTE: You will have approximately 5 seconds to set the Temperature required before the display
returns to normal..
NOTE: Some of the Pre-set programs lock the Temperature so you cannot adjust during operation.
Within 5 seconds, rotate the knob to adjust the temperature required.
You are able to adjust the temperature whilst the appliance is in operation unless in some of the Pre-
Set programs
NOTE: As you adjust the Temperature, you will notice the digits above the Heating Power Touch
Button will also increment depending on the temperature selected.
It is advisable to use these default heating settings based on the temperature selected.
The Temperature setting can be set from 37°C up to a maximum of 120°C.
NOTE: The Thermometer Symbol will change from White colour to Red colour when the
temperature reaches or exceeds 60°C +/-5°C.
23