Optimum THERMOCOOK ESSENTIAL User Manual page 24

AUTO OFF TIMER
The switch is on the back of appliance.
Use this switch to switch the appliance on of off.
This part of the Digital Display shows hour: minute: seconds.
To set the desired operation time, touch the Timer Touch Button to enter the Minute Setting
and the Minute Digits will blink.
Rotate the knob to adjust the minutes required.
Touch the Timer Touch Button again to enter the Seconds Setting and the Seconds Digits will blink.
Rotate the knob to adjust the seconds required.
Touch the Timer Touch Button again to enter the Hours Setting and the Hour Digits will blink.
Rotate the knob to adjust the Hours required from 1 to 12 Hours.
NOTE: After setting the timer, wait for 5 seconds for the timer to stop blinking and then start the
appliance working.
If you start the appliance without setting the timer, the timer will start to count up. Touch the Timer
Touch Button whilst working and the timer will start to count down and the appliance will turn off
when the auto off time has been reached.
For example: You have started the appliance and the timer has counted up to 15 seconds. At the
same time, it reached 15 seconds, touch the Timer Touch Button and the timer will
then start to count down from 15 seconds and when the timer reaches 0, the appliance will
turn off and display "End" and will beep.
To clear the word "End", press the Start / Pause button.
22