Thermo Scientific Nicolet iS50 User Manual page 9

Changing the Pressure Tip
Thermo Scientific
The pressure arm rotates to the side for sampling liquids or changing the tip. The pressure
tower can be removed if necessary. See
information.
Figure 4. Pressure tip features
NOTICE
• Move the pressure arm away from the sampling area before you change the tip.
• Make sure the tip is properly threaded. The base of the tip should press against the
pressure arm when fully installed.
• Do not use tools to loosen or tighten a pressure tip. Using tools may damage the tip.
• Do not overtighten the tips.
 To change the pressure tip
The tip can be screwed on and off while the pressure arm is raised. Move the arm to the
resting position for easy access. The following tip styles are available.
"Installing and Removing the Pressure
Pressure tip (installed)
Extra tip
( watch video)
1
iS50 ATR Module
Arm" for more
iS50 ATR Module User Guide 7