Thermo Scientific
When the stability test is completed, another message may be displayed while the
instrument runs a performance test.
2. Wait until the performance test is completed. If the system passed the performance test,
choose OK. If the system failed the test, see "Troubleshooting."
3. If your ATR workflow is not configured, follow the steps in the
Workflow" section to configure it.
4. Press the ATR Touch Point again to start the workflow.
A message asks you to enter a spectrum title.
5. Enter a title for your sample spectrum and choose OK (or press the ATR Touch Point to
accept the default title). If the software has no appropriate background spectrum in
memory, a message tells you to prepare for the background collection.
1
iS50 ATR Module
"Configuring Your ATR
iS50 ATR Module User Guide
19