Thermo Scientific Nicolet iS50 User Manual page 19

Hide thumbs Also See for Nicolet iS50:

Measuring a Liquid Sample by ATR

Thermo Scientific

The sample spectrum and its associated analysis results are stored in a virtual auto report.

If your workflow is set up to preview or print auto reports, the report is displayed or

printed using the default printer. Below is an example report showing an ATR spectrum

of a yellow sticky note taken with the iS50 ATR module, follow by the results from a

spectral search.

Figure 8.

Auto report showing an ATR spectrum of a yellow sticky note taken with the

iS50 ATR module and the results from a spectral search

11. Raise the pressure arm and remove the sample.

12. Clean the sampling plate, crystal and pressure tip.

For cleaning instructions and recommended solvents, see

Before You Begin

• Select appropriate liquid, paste or gel sample (we use isopropyl alcohol for this

experiment).

• Make sure the

sampling plate

•

Raise the pressure arm

kit.

• Make sure the crystal is clean. For cleaning instructions and recommended solvents, see

"Cleaning the

Crystal."

is installed.

and move it to the resting position or install the

iS50 ATR Module

"Cleaning the

Crystal."

liquid sampling

iS50 ATR Module User Guide

Table of Contents