Thermo Scientific Nicolet iS50 User Manual page 23

Hide thumbs Also See for Nicolet iS50:

Typical ATR Spectra

Thermo Scientific

The sample spectrum and its associated analysis results are stored in a virtual auto report.

If your workflow is set up to preview or print auto reports, the report is displayed or

printed using the default printer. Below is an example report showing an ATR spectrum

of isopropanol taken with the iS50 ATR module, follow by the results from a spectral

search.

Figure 10. Auto report showing an ATR spectrum of isopropanol taken with the iS50 ATR

module and the results from a spectral search

10. Remove the sample cover if used.

11. Raise the pressure arm and remove the liquid sampling kit if used.

12. Clean the sampling plate and crystal.

For cleaning instructions and recommended solvents, see

The background spectrum shows the response of the spectrometer and the ATR module

without a sample in place. Below is a typical background spectrum collected with the

iS50 ATR module.

iS50 ATR Module

"Cleaning the

Crystal."

iS50 ATR Module User Guide

Table of Contents