Flush mounting – classic bricks
•
incl. hollow bricks, thermally insulated walls, etc.
What you need for mounting:
•
a properly cut hole as instructed in the box package
•
plaster, mounting glue, mounting foam or mortar as necessary
®
•
2N
IP Solo, flush mounting boxes (Part No. 9155017)
Flush mounting – plasterboard
What you need for mounting:
•
a properly cut hole as instructed in the box package
®
•
2N
IP Solo, flush mounting boxes (Part No. 9155017)
Flush mounting – plasterboard
What you need for mounting:
•
a properly cut hole as instructed in the box package
®
•
2N
IP Solo, flush mounting boxes (Part No. 9155017)
Installation manual 2N® IP Solo
27 / 74