2N IP Solo Installation Manual page 21

Part No. 91341481E
Axis Part No. 02520-001
Part No. 932928
Two-Wire Connection
2N Part No. 9159014EU/
UK
2N Part No. 9159014US
Axis Part No. 01404-001
• Stabilised 12 V / 2 A power supply needs to be used where no
PoE is available.
• 12 V transformer
• For 230 V mains voltage.
• For external power supply of the lock with 12 V AC voltage.
®
• 2N 2Wire
• (set of 2 adapters and power source for EU/US/UK)
®
• The 2N 2Wire converter allows you to use the existing wiring
(2 wires) from your original door bell or door intercom to
connect any IP device. No configuration is necessary, all you
®
need is one 2N 2Wire unit at each end of the cable and a
power source connected to at least one of these units.
®
The 2N 2Wire unit then provides PoE power not only to the
second converter, but also to all the other connected IP end
devices.
Installation manual 2N® IP Solo
21 / 74