Intercharacter, Interfunction, And Intermessage Delays; Intercharacter Delay; User Specified Intercharacter Delay - Honeywell Vuquest 3320g User Manual

Intercharacter, Interfunction, and Intermessage Delays

Some terminals drop information (characters) if data comes through too quickly.
Intercharacter, interfunction, and intermessage delays slow the transmission of
data, increasing data integrity.

Intercharacter Delay

An intercharacter delay of up to 5000 milliseconds (in 5ms increments) may be
placed between the transmission of each character of scanned data. Scan the
Intercharacter Delay barcode below, then scan the number of 5ms delays, and the
Save barcode using the
To remove this delay, scan the Intercharacter Delay barcode, then set the number
of delays to 0. Scan the Save barcode using the
page 222.
Note: Intercharacter delays are not supported in USB serial.

User Specified Intercharacter Delay

An intercharacter delay of up to 5000 milliseconds (in 5ms increments) may be
placed after the transmission of a particular character of scanned data. Scan the
Delay Length barcode below, then scan the number of 5ms delays, and the Save
barcode from the
Next, scan the Character to Trigger Delay barcode, then the 2-digit hex value for a
printable character to trigger the delay (see
Delay Length
To remove this delay, scan the Delay Length barcode, and set the number of delays
to 0. Scan the Save barcode from the
Vuquest 3320g User Guide
Programming
Prefix
1
Intercharacter Delay
Intercharacter Delay
Programming Chart, beginning on page 222.
Chart, beginning on page 222.
Scanned Data Suffix
2 3 4 5
Programming
Symbology Charts
Programming Chart, beginning on page 222.
Chart, beginning on
on page 211).
Character to Trigger Delay
65