Function Code Transmit; Intercharacter, Interfunction, And Intermessage Delays; Intercharacter Delay - Honeywell Voyager XP 147 Series User Manual

Function Code Transmit

When this selection is enabled and function codes are contained within the
scanned data, the scanner transmits the function code to the terminal. Charts of
these function codes are provided in the
1252). When the scanner is in keyboard wedge mode, the scan code is converted to
a key code before it is transmitted. Default = Enable.

Intercharacter, Interfunction, and Intermessage Delays

Some terminals drop information (characters) if data comes through too quickly.
Intercharacter, interfunction, and intermessage delays slow the transmission of
data, increasing data integrity.

Intercharacter Delay

An intercharacter delay of up to 5000 milliseconds (in 5ms increments) may be
placed between the transmission of each character of scanned data. Scan the
Intercharacter Delay barcode below, then scan the number of 5ms delays, and the
Save barcode using the
96
Clear All Suffixes
* Enable
Programming
ASCII Conversion Chart (Code Page
Chart.
Prefix Scanned Data
1 2 3 4 5
Intercharacter Delay
Intercharacter Delay
Disable
Suffix
Voyager XP User Guide