To Add A Prefix Or Suffix; Clear One Or All Prefixes Or Suffixes - Honeywell HF680 Series User Manual

•
•

To Add a Prefix or Suffix:

Step 1.
Step 2.
Step 3.
To add the Code I.D., scan 5, C, 8, 0.
To add the AIM I.D., scan 5, C, 8, 1.
To add the serial number, scan 5, C, 8, 8.
To add a backslash (\), scan 5, C, 5, C.
Note: When adding a backslash (\), you must scan 5C twice – once to create the leading
backslash and then to create the backslash itself.
Step 4.
Step 5.
Repeat the steps above to add a prefix or suffix for another symbology.
Example: Add a Tab Suffix to All Symbologies
Step 1.
Step 2.
Step 3.
Step 4.

Clear One or All Prefixes or Suffixes

You can clear a single prefix or suffix, or clear all prefixes/suffixes for a symbology.
If you have been entering prefixes and suffixes for single symbologies, you can use
Clear One Prefix (Suffix) to delete a specific character from a symbology. When
you Clear All Prefixes (Suffixes), all the prefixes or suffixes for a symbology are
deleted.
48
When setting up for specific symbologies (as opposed to all symbologies), the
specific symbology ID value counts as an added prefix or suffix character.
The maximum size of a prefix or suffix configuration is 200 characters, which
includes header information.
Scan the Add Prefix or Add Suffix symbol
Determine the 2 digit Hex value from the Symbology Chart (included in
the Symbology
prefix or suffix. For example, for Code 128, Code ID is "j" and Hex ID is
"6A".
Scan the 2 hex digits from the
symbologies.
Repeat Steps 2 and 3 for every prefix or suffix character.
Scan Save to exit and save, or scan Discard to exit without saving.
Scan Add Suffix.
Scan 9, 9 from the
symbologies.
Scan 0, 9 from the
value for a horizontal tab, shown in the
Page 1252),
Scan Save, or scan Discard to exit without saving.
Charts) for the symbology to which you want to apply the
Programming Chart
Programming Chart
Programming
beginning on page 164.
(page 49).
or scan 9, 9 for all
to apply this suffix to all
Chart. This corresponds with the hex
ASCII Conversion Chart (Code
HF680 Series User Guide