Danfoss VLT Flow Drive FC 111 Design Manual page 100

VLT® Flow Drive FC 111
Design Guide
2. Press [OK] and [Menu].
3.
Power up the drive while still pressing the keys for 10 s.
4. The drive is now reset, except for the following parameters.
•
Parameter 1-06 Clockwise Direction
•
Parameter 15-00 Operating hours
• Parameter 15-03 Power Up's
•
Parameter 15-04 Over Temp's
•
Parameter 15-05 Over Volt's
• Parameter group 15-4* Drive identification
•
Parameter 18-10 FireMode Log:Event
100 | Danfoss A/S © 2021.04
Programming
AJ363928382091en-000101 / 130R0983