Infineon XMC4800 Relax EtherCAT Getting Started page 16
Generic slave example
Hide thumbs
Also See for XMC4800 Relax EtherCAT:
- Getting started (61 pages) ,
- Manual (20 pages) ,
- Manual (28 pages)
Advertisement
Description
Setup PWM for dimmable LED2 on P5.8
For driving the dimmable LED2 on
the XMC4800 Relax EtherCAT
PWM_CCU8 is used. The PWM is
set to start during initialization,
frequency is 500 Hz and the initial
duty cycle is set to 50%. The pin
P5.8 is allocated to channel1 of
CCU8 inside manual pin allocator
(right-click PWM_CCU8 APP).
Copyright © Infineon Technologies AG 2016. All rights reserved.
Kit
®
16
Advertisement
