XMC 2Go evaluation kit user guide About this document Scope and purpose This document describes the features and hardware details of the XMC 2Go equipped with the ARM® Cortex™- M0 based XMC1100 microcontroller from Infineon Technologies AG. Intended audience This document is intended for users who use XMC 2Go kit with the XMC1100 microcontroller.
XMC 2Go evaluation kit user guide Table of contents Table of contents About this document ........................1 Table of contents ..........................2 Overview ..........................3 Key features ............................. 3 Block diagram ............................3 Hardware description ......................5 Power supply ............................5 Pin header connector ..........................
XMC 2Go evaluation kit user guide Overview Overview The XMC 2Go is designed to evaluate the capabilities of the XMC1100 microcontroller and the powerful, free of charge tool chain DAVE™. This board is not cost optimized and does not serve as a reference design.
Page 4
Two 8-pin header X1 and X2 • Onboard power generation for power supply of the XMC1100 microcontroller and the debug IC • 2 User LEDs • Block diagram of the XMC 2Go kit Figure 1 User Guide 4 of 12 002-34988 Rev. ** 2022-04-26...
Power supply The XMC 2Go kit must be supplied by an external 5 Volt DC power supply connected to the Micro USB plugs (X101). Out of the box with the preprogrammed application and the onboard debugger in operation the XMC 2Go typically draws about 75 mA.
TSSOP-16 pin package. The pinning table is also printed onto the bottom side of the PCB. Pin_Header.emf Figure 3 Pinning of pin header User LEDs The port pins P1.0 and P1.2 of the XMC1100 on the XMC 2Go Kit are connected to LEDs exclusively. Table 2 Pins used for the user LEDs Port pin LED1 P1.1...
Page 7
XMC 2Go evaluation kit user guide Hardware description The XMC1100 on the XMC 2Go kit is configured to SWD1 mode. Use the “BMI Get Set” tool integrated into DAVE™ to configure the XMC1100 to e.g., SPD1 mode if required. Note: Unintended use of the “BMI Get Set”...
XMC 2Go evaluation kit user guide Production data Production data Schematics The schematic of the XMC 2Go kit can be found in Figure Figure 5 Schematic of the XMC 2Go kit with XMC1100 User Guide 8 of 12 002-34988 Rev. **...
XMC 2Go evaluation kit user guide Production data Components placement and geometry Figure 6 Components placement and geometry List of material The list of material is valid for the XMC 2Go kit with XMC1100 version 1. Table 4 List of material Value Device Reference designator...
XMC 2Go evaluation kit user guide Revision history Revision history Date Version Description 2022-04-26 Initial release User Guide 11 of 12 002-34988 Rev. ** 2022-04-26...
Page 12
With respect to any examples, hints or any typical WARNINGS values stated herein and/or any information 81726 Munich, Germany regarding the application of the product, Infineon Due to technical requirements products may contain Technologies hereby disclaims any and all dangerous substances. For information on the types...