3.2.7.
Settings Module
The Settings module contains the Device Information on Page 1, Additional Settings on Page 2, and
Auto Power Off settings on Page 3.
3.2.7.1.
Device Information
Page 1 shows the device's hardware and software information.
1. Select "Settings".
3.2.7.2.
Additional Settings
Page 2 contains the settings for Screen's brightness, Date and Time settings.
1. Select "Settings".
3.2.7.3.
Auto Power Settings
Page 3 shows the option to enable Auto Power setting.
1. Select "Settings".
ACR350 Validator with QR Code Scanner – User Manual
Version 1.02
2. Information including Model, firmware
version, and Date/Time will be shown
Figure 33: Device Information
2. Select "2" on the bottom
right to turn to page 2.
Figure 34: Additional Settings
2. Select "3" on the bottom
right to turn to page 3.
Figure 35: Auto Power Settings
3. Screen's brightness, Date
and Time can be set on this
page.
3. Select "Auto power off".
Page 55 of 61
info@acs.com.hk
www.acs.com.hk
Need help?
Do you have a question about the ACR350 and is the answer not in the manual?