Table of Contents
Advertisement
2.4. Turning the Device ON/OFF
2.4.1.
Turning on the Device
To turn the device on, plug the device's power cable to a power source. The validator will
automatically turn on.
2.4.2.
Turning off the Device
To turn the device off, press the power button once.
To hard power off the device, press and hold the power button for few seconds.
Note: press the power button once to turn on the device after a power off cycle. The power button is
at the back of the device, as shown in the image below:
ACR350 Validator with QR Code Scanner – User Manual
Version 1.02
Figure 8: Power Button
Page 31 of 61
info@acs.com.hk
www.acs.com.hk
Advertisement
Table of Contents
Need help?
Do you have a question about the ACR350 and is the answer not in the manual?