Safety In Hydraulic Pressure Mode; Lifting Equipment And Forklift; 3.10 Overload Protection - probst FUG Operating Instructions Manual

Safety
3.9.2

Safety in Hydraulic pressure mode

●
The best gripping power will be achieved if the control lever is holding two more seconds after the gripping
(closing action). Subsequent the control lever must be moved back in the neutral position.
●
This valve is adjusted and sealed by the manufacturer (for the maximum hydraulic pressure adjustment).
Do not remove the sealing without contact to the manufacturer.
3.9.3

Lifting equipment and forklift

●
The lifting equipment / forklift including truss has to be in good, safe working condition.
●
Never exceed the maximum allowable carrying capacity/working load limit (WLL) of the lifting equipment / fork
lift!
●
The operator staff must have all the necessary qualifications.
●
Only authorized and qualified personnel is allowed to operate the lifting equipment / fork lift.

3.10 Overload Protection

As diverse fork lifts have different hydraulic pressures, is the device equipped with an excess pressure valve
to avoid excess pressure.
This valve is adjusted and sealed by the manufacturer.
Do not remove the sealing without contact to the manufacturer!
10 / 17