Supermicro SuperServer SYS-210TP-HPTR User Manual page 67

RAID Key Header
An Intel VROC RAID Key header is located at JRK1. It supports VMD used in creating optional
advanced NVMe RAID configurations.
BMC External I C Header
2
A 4-pin system management bus header for the BMC is located at JIPMB1. Connect a cable
to this header to use the IPMB I
Disk-On-Module Power Connector
Two power connectors for SATA DOM (Disk-On-Module) devices are located at JSD1 and
JSD2. Connect appropriate cables here to provide power support for your Serial Link DOM
devices.
RAID Key Header
Pin Definitions
Pin# Definition
1 Ground
2 3.3V Standby
3 Ground
4 PCH_RAID_KEY
VROC Key
Header (JRK1)
C connection on your system.
2
External I C Header
2
Pin Definitions
Pin# Definition
1 Data
2 Ground
3 Clock
4 No Connection
DOM Power
Pin Definitions
Pin# Definition
1 5V
2 Ground
3 Ground
67
Chapter 2: Server Installation
Note: This drawing is
for illustration only. Your
motherboard may look
different.