Supermicro SuperServer SYS-210TP-HPTR User Manual page 60

5. Push the fan up from the bottom and out of the top of the housing.
6. Replace the failed fan with an identical fan, available from Supermicro. Push the new
fan into the housing, making sure the air flow direction is the same.
7. Put the fan housing back into the chassis and reconnect the fan power cables.
8. Power up the node and check that the fan is working properly and that the LED on the
control panel has turned off. Re-install the chassis cover.
Chapter 3: Maintenance and Component Installation
Figure 3-13. Replacing a System Fan
60