Table of Contents
Advertisement
Guide at
http://www.lantronix.com/support/documentation.html
and operation of Spider View software.
Platform-independent management—Each Spider device contains an embedded web server
that delivers web pages, a KVM Remote Console program, and a terminal program. To access
and manage the client server, a web browser running the latest version is required (Chrome,
Edge, Firefox, Safari).
Network Environment
The connection between the client and Spider device must be open to IP traffic and use TCP port
443 (HTTPS). Firewalls and NAT devices should be configured to support this configuration. The
TCP port can be changed by accessing Interfaces > Network.
Lantronix recommends using Fast Ethernet connections and a switched network environment
because In a LAN, traffic affects the responsiveness of the Remote Console window.
Spider Power
The Spider device consumes under 10 watts of power that it draws from the attached computer. It
requires all cables to be plugged in to receive sufficient power.
Plug in both USB cables or a USB and a PS/2 cable. Pwr1 and Pwr2 LEDs indicate that power is
available. Pwr1 indicates that power is available only on the first USB port. Pwr2 indicates that
power is available on the second USB port or the PS/2 port. When both LEDs are lit, the Spider
device is powered and can boot.
The Spider device can also get power from an external DC power supply. DC power supplies are
available from Lantronix (part number 520-085-R). The DC power supply acts as a backup,
because the Spider device loses power when the attached computer goes down.
Use the power-on reset to reboot the Spider device or reboot from the user interface, from the
serial port, or by clicking the reset switch through the pinhole on the back of the body.
Spider™ and SpiderDuo® KVM-over-IP Device User Guide
3: Installing the Spider Device
for instructions on installation
29
Advertisement
Table of Contents
