z Using the T-tap connector (male/female) included as standard
1
2
3
Power on
Turn on power of 12 to 30 VDC to the OC-907C T.
Indicator confirmation
OA-607 T indicator
z Operation indicator
Procedures
Color
Before initial setup
Orange
During initial setup
Orange
Green
Orange
During auto area
See Automatic settings and auto area learn.
learn
During normal oper-
Green
ation
Red
Red
Error or warning
See Troubleshooting.
generated
Sensor setting via
See Function settings.
Wi-Fi
Put the wire in the connector.
Use the pliers to fold the
connector over the wire.
Squeeze the connector
together until it locks.
Operation indicator
Indicator diagram
Status
Blinking (0.5 s
intervals)
Blinking fast (0.1 s
intervals)
Solid
Blinking (0.5 s
intervals)
Solid
Blinking fast (0.1 s
intervals)
Solid
4
5
Meaning
Configuration error within setting error
Auto configuration start
Auto configuration normally completed (stand-by)
Auto configuration abnormally completed
Stand-by
1st row detection
2nd/3rd row detection
Insert the wire into the
terminal and crimp it down
to secure the wire.
Plug the terminal directly
into the connector.
13