Harmony Series H2 Cylindrical Lock
Parts Breakdown
6
Lever Hand Reverse Door
Prior to installation, please confirm receipt of all parts.
Tools Required:
•
#2 Phillips screwdriver
•
Push pin (provided)
•
3/32" drill bit
•
5/32" drill bit
•
5/16" drill bit
•
3/8" drill bit
•
7/16" drill bit
•
1" bore
•
1-1/2" bore
•
2-1/8" bore
A8028E • 800-810-WIRE (9473) • www.sargentlock.com
10*
*If you are replacing iCLASS-only product:
•
Replace both reader & controller with SE products
•
Consult factory for details
If you are replacing an iCLASS SE product:
•
Reader or controller can be ordered separately
7
*Adapter Plate is only
shipped with orders that
specify 1-3/8" doors.
16