Section 1 Introduction; This Manual; Intended Audience; Product Documentation - ABB Relion 615 Series Manual

1MRS757823 A
Section 1
1.1
1.2
1.3
1.3.1
Recloser Protection and Control RER615
Point List Manual
Introduction

This manual

The point list manual describes the outlook and properties of the data points
specific to the IED. The manual should be used in conjunction with the
corresponding communication protocol manual.

Intended audience

This manual addresses the communication system engineer or system integrator
responsible for pre-engineering and engineering for communication setup in a
substation from an IED perspective.
The system engineer or system integrator must have a basic knowledge of
communication in protection and control systems and thorough knowledge of the
specific communication protocol.

Product documentation

Product documentation set

The application engineering guide contains application descriptions and setting
guidelines sorted per function. The manual can be used to find out when and for
what purpose a typical protection function can be used. The manual can also be
used when calculating settings.
The communication protocol manual describes a communication protocol
supported by the IED. The manual concentrates on vendor-specific implementations.
The engineering guide provides information for IEC 61850 engineering of the
protection IEDs with PCM600 and IET600. This guide concentrates especially on
the configuration of GOOSE communication with these tools. The guide can be
used as a technical reference during the engineering phase, installation and
commissioning phase, and during normal service. For more details on tool usage,
see the PCM600 documentation.
The engineering manual contains instructions on how to engineer the IEDs using
the different tools in PCM600. The manual provides instructions on how to set up a
PCM600 project and insert IEDs to the project structure. The manual also
Section 1
Introduction
7