Ld0.Xggio110 Physical I/O; Ld0.Xggio120 Physical I/O; Binary Outputs - ABB Relion 615 Series Manual

1MRS757823 A
2.3.9.2
Table 75:

LD0.XGGIO110 Physical I/O

IEC 61850 name
LD0.XGGIO110
.Ind1.stVal
.Ind2.stVal
.Ind3.stVal
.Ind4.stVal
.Ind5.stVal
.Ind6.stVal
.Ind7.stVal
.Ind8.stVal
.SPCSO1.stVal
.SPCSO2.stVal
.SPCSO3.stVal
.SPCSO4.stVal
2.3.9.3
Table 76:

LD0.XGGIO120 Physical I/O

IEC 61850 name
LD0.XGGIO120
.Ind1.stVal
.Ind2.stVal
.Ind3.stVal
.Ind4.stVal
2.4
Recloser Protection and Control RER615
Point List Manual
LD0.XGGIO110 Physical I/O
SA name
-
-
-
-
-
-
-
-
-
-
-
-
LD0.XGGIO120 Physical I/O
SA name
-
-
-
-

Binary outputs

Table 77: Explanations of the binary output table columns
Column name Description
IEC 61850 Original IED data object identification. Described in the IEC 61850 format as
name Logical Device.Logical Node and thereafter .Data Object.Data Attribute. Logical
Node is the same as the application function block name.
SA name The signal may have a defined label that is visible, for example, in the Application
Configuration tool in PCM600.
Description Short description of the signal. See the technical manual for more information.
Type Output type. Some outputs can only be controlled with value "On". Writing "Off" to
these points does not affect the function of the output. See the DNP3 control relay
output block parameters.
Description
X110-Input 1
X110-Input 2
X110-Input 3
X110-Input 4
X110-Input 5
X110-Input 6
X110-Input 7
X110-Input 8
X110-Output 1
X110-Output 2
X110-Output 3
X110-Output 4
Description
X120-Input 1
X120-Input 2
X120-Input 3
X120-Input 4
Section 2
DNP3 data mappings
Values
1/0=ON/OFF
1/0=ON/OFF
1/0=ON/OFF
1/0=ON/OFF
1/0=ON/OFF
1/0=ON/OFF
1/0=ON/OFF
1/0=ON/OFF
1/0=ON/OFF
1/0=ON/OFF
1/0=ON/OFF
1/0=ON/OFF
Values
1/0=ON/OFF
1/0=ON/OFF
1/0=ON/OFF
1/0=ON/OFF
37