HIKVISION DS-7764NI-M4 User Manual page 53

3. Select the patrol No.
4. Click Set.
5. Click to add a key point to the patrol.
1) Configure key point parameters.
Preset
Determines the order the PTZ will follow while cycling through the patrol.
Speed
Defines the speed the PTZ will move from one key point to the next.
Duration
Refers to the duration to stay at the corresponding key point.
2) Click Apply to save the key points to the patrol.
6. Other operation is as follows.
Network Video Recorder User Manual
Figure 3-12 Patrol Settings
Figure 3-13 Key Point Configuration
32