HIKVISION DS-7764NI-M4 User Manual page 60

Before You Start
Ensure you have installed the HDDs to the device or added the network disks before storing the
●
video files, pictures and log files.
Before enabling Motion, Alarm, M | A (motion or alarm), M & A (motion and alarm), and Event
●
triggered recording and capture, you must configure the motion detection settings, alarm input
settings and other events as well. Refer to VCA Event Alarm for details.
Steps
1. Go to Storage → Schedule → Record .
2. Select a camera.
3. Check Enable Schedule.
4. Select a recording type.
Continuous
Scheduled recording.
Event
Recording triggered by all event triggered alarm.
Motion
Recording triggered by motion detection.
Alarm
Recording triggered by alarm.
M/A
Recording triggered by either motion detection or alarm.
M&A
Recording triggered by motion detection and alarm.
POS
Recording triggered by POS and alarm.
5. Drag the cursor on time bar to set the record schedule.
Network Video Recorder User Manual
39