HIKVISION DS-7764NI-M4 User Manual page 102

3. Enter access control device information. The information must be the same with the alarm
device to add.
4. Optional: Check Enable IoT Time Sync as your desire.
Note
All IoT channels can be enabled/disabled with shortcuts.
a. Go to Maintenance → System Service → More Settings .
b. Click Time Sync Configuration, select Enable IoT Time Sync or Disable IoT Time Sync to
enable/disable scheduled time sync for all IoT channels.
This function is only available for the admin user.
5. Click Add.
Network Video Recorder User Manual
Figure 7-3 Alarm Device
Figure 7-4 IoT Time Sync
81